Top Woodman Products
|
Woodman Elite Frame Brake Adapters
- Adapters to convert Elite's Magura HS direct mount to standard rim/V brake
- Compatible with other frames that have Magura hydraulic rim brake mounts
- Brake studs included. Sold as a pair
|
$37.95 |
|
Woodman Carbo EL Seatpost
- One of the lightest posts available at only 125 grams (27.2/400mm)
- Advanced carbon composite pillar with internal carbon reinforcement rings to prevent clamping damage and seatpost slippage
- Tested to hightest standards not only during development, but also during mass production
- Titanium bolts, 0" clamp offset
|
$174.95 |
|
Woodman Carbo Seatpost
- Thermoset carbon composite pillar. 58mm top rail clamping area
- 25mm bottom rail clamping area. Micro adjust, 2 bolt clamp. 0" clamp offset
- Anti-compression rings prevent slippage at clamp area. 223g (27.2x320)
|
$57.95 |
|
Woodman Saturn 1.5" Headset
- DBS triple bearing headset with radial load cartridge bearings upper and lower plus bottom needle thrust bearing
- CNC 6061 aluminum cups
- WN-3016: headset for Onepointfive frames to accept 1.5" steerer forks
- WN-3017: converts Onepointfive frames to accept 1-1/8" steerer forks (also known as the Saturn Solution)
|
$93.95 |
|
Woodman Axis IC Comp Headset
- Economical CNC 6061 aluminum cap with 45/45 degree angular contact cartridge bearings
- Choose 5mm or 20mm top cap. Alloy top cap and star nut included
- IS-CA: Integrated System threadless drop-in headset for Campagnolo Hiddenset compatible frames with 41.8mm headtube ID
|
$28.95 |
|
Woodman Axis ICR Comp Headset
- Economical CNC 6061 aluminum cap with 36/45 degree angular contact cartridge bearings
- Choose 5mm or 20mm top cap. Alloy top cap and star nut included
- IS-CC: Integrated System threadless drop-in headset for Cane Creek compatible frames with 41.0mm headtube ID
|
$28.95 |
|
Woodman Capsule PH
- Reuseable threadless headset preload device for 1-1/8" carbon steerers
- Dual wedge expander sleeve offers greater contact area which reinforces the steerer tube against stem clamping loads
- Grooved sleeve will not slip, even under strong vibrations
- Includes 7075 aluminum bolt and an elastomer to prevent overtightening
- Choose carbon fiber or aluminum top cap
|
$14.95 |
|
Woodman Capsule Extrem Headset Lock
- Replace star nut with headset compression device
- Fits threadless steerers from 175mm to 270mm
- All aluminum construction to save weight
- 6mm threaded hole in base for fender attachment
- 80g
|
$23.95 |
|
Woodman Wow-4 Stem
- Lightweight forged, machined and welded 6061 aluminum with stainless screws
- Laser etched logos facing 2 directions making stem flip-floppable. 200g
|
$28.95 |
|
Woodman Bill-LTI Disc Hubs
- Sealed CNC machined 6061 aluminum shell, sealed cartridge bearings
- International Standard 6-bolt disc rotor mount
- Front includes V-cup adaptors to fit 9x100mm Q/R or 20x110mm through-axle (pictured with 1 of each cup)
- Steel freehub on all rears unless otherwise stated
- Always use grease when installing V-cups. 215/340/345g
|
$79.95 |
|
Woodman Bill-Singlespeed Disc Hub
- Singlespeed cassette freehub disc rear hub
- CNC machined 6061 aluminum shell with steel HG-spline cassette body
- Sealed cartridge bearings with micro adjustment
- International Standard 6-bolt disc rotor mount
- Includes 10mm solid nutted axle with nuts, 14t and 16t cogs. 460g
|
$115.95 |
|
Woodman Bill-Extrem Disc Hub
- Nutted, solid CrMo 15mm axle with 10mm flats to fit standard frames
- Forged alloy shell, CrMo HG-type cassette body
- Sealed cartridge bearings, 135mm OL (180mm long axle)
- International Standard 6-bolt disc rotor mount. 550g
|
$119.95 |
|
Woodman Disco System Disc Brake Adapter/Hub
- Adapts a non-disc frame to accept 51mm International Standard calipers
- Stabilizer arm attaches to frame's left brake post stud, providing a 51mm disc brake caliper mount
- 125mm spacing rear hub integrates with Disco System 10mm thick adapter plate/arm for 135mm total OL dimension)
- CNC 6061 aluminum shell, sealed bearings, steel 8/9sp HG freehub body, International-Standard 6-bolt (44mm-BCD) disc mount
- Disco System specific quick release skewer included
- Will not fit frames with pivots between dropout and brake post boss (Horst link pivot below dropout is acceptable)
|
$131.95 |
|
Woodman Carbo Skewers
- Sexy, long carbon fiber lever handles for easy opening and closing
- Forged aluminum nuts
|
$79.95 |
|
Woodman Woody Bottle Cage
- Hand finished wooden bottle cage bonded to a composite mounting spine
- Small logo shows off natural wood finish. Includes (2) 12mm 7075 aluminum screws
|
$57.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|