if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Split Ring design allows for non shouldered bearing retention
- Uses replaceable, full complement bearings (21531): 21.5x31x7mm
- 113mm and 118mm sizes fits 68mm or 73mm English threaded BB shells with supplied spacer
- Installs with 8 notch, Truvativ or Park (BBT-8) ISIS tools
- M15 crank arm mounting bolts not included |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For Campagnolo cranks utilizing the Ultra-Torque, Hirth joint bottom-bracket spindle system
- Bearings are installed and included with crankset, these are the threaded crank/bearing-to-frame interface cups
- Wide-stance, overboard design: 49g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Asymmetrical design for Record Pista track cranksets
- Sealed bearings, carbon fiber spacer/sleeve and aluminum cups with a fixed, drive-side flange
- Hollow, 2-degree (ISO) square taper spindle: 220g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For Campagnolo Record/Chorus ISO road double and triple cranksets
- Sealed bearings, carbon fiber spacer/sleeve and aluminum cups with a fixed, drive-side flange
- Internal cup, tool interface for installation/removal
- Hollow, 2-degree (ISO) square taper CrMo spindle (asymmetrical on 111mm length): 190/200g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For Campagnolo ISO road cranksets (Centaur, Veloce, Triple-series level)
- Sealed bearings, aluminum spacer/sleeve and cups with a fixed, drive-side flange
- Internal cup, tool interface for installation/removal
- 2-degree (ISO) square taper CrMo spindle: 235/245g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For Campagnolo ISO road cranksets (Veloce, Mirage, Xenon, Triple-series level)
- Sealed bearings with aluminum spacer/sleeve and cups with fixed flanges
- External flange, tool interface for installation/removal
- 2-degree (ISO) square taper CrMo spindle: 299/315g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Forged and CNC'd titanium spindle with carbon fiber center-shell
- Machined aluminum cups with drive side lip-cup and pre-treated with thread-lock compound
- ISIS: 10-spline 16mm deep spindle (108mm for 43.5mm chainline)
- Choose English (1.37"x24tpi
- LH/RH), or Italian (M36x24tpi
- RH/RH): 165g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Forged and CNC'd CrMo spindle with aluminum center-shell
- Machined aluminum cups with drive side lip-cup and pre-treated with thread-lock compound
- ISIS: 10-spline 16mm deep spindle (108mm for 43.5mm chainline)
- Choose English (1.37"x24tpi
- LH/RH), or Italian (M36x24tpi
- RH/RH): 205g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Ceramic ball cartridge bearings for maximum life, smoothest balls and the lightest weight
- Left and right bottom bracket cupset. 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
- BB-8200 for K-Force Light and SLK Light Road MegaExo cranks only (BB-8200 has a narrower overall width for a lower Q factor and the bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-8000 for K-Force and SLK Road MegaExo cranks only
- BB-9200 is for K-Force Light MTB MegaExo cranks only
- BB-9000 is for K-Force MTB MegaExo cranks only
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-8000 for FSA K-Force and SLK Road MegaExo cranks only
- BB-9000 is for 24mm spindle MTB K-force and MTB Team Issue cranks
- BB-1000 is for 19mm spindle MTB Gamma and Omega Drive cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Left and right bottom bracket cups for FSA Gravity integrated-spindle 4-bearing MegaExo cranksets
- model BB-7550
- Four 6805 cartridge bearings for heavy duty applications
- 1.37" x 24tpi (English threads)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Forged hollow CrMo spindle with Ti-Nitride coating
- MegaQuad: twin, double-row, angular contact cartridge bearings on both left and right sides
- Forged aluminum cups with lip on drive side (except NF version for track)
- Self-extracting 15mm steel crank bolts included. 199g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Extra-thick walled hollow CrMo spindle with Ti-Nitride coating
- Industrial cartridge bearings. 12mm steel crank bolts
- Forged aluminum cups with lip on drive side. 280g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Forged hollow CrMo spindle with Ti-Nitride coating
- Sealed, integrated bearing mechanism
- Forged aluminum cups with lip on drive side
- 15mm steel crank bolts included. 225g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Ultralight hollow 6/4 titanium spindle with Ti-Nitride coating
- ISIS: 10-spline 16mm deep spindle
- MegaQuad: twin, double-row, angular contact cartridge bearings on both left and right sides
- Forged aluminum cups with lip on drive side
- 14mm 7075 aluminum crank bolts with washers/o-rings included. 185g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For Fulcrum Racing-Torq cranks utilizing the Ultra-Torque, Hirth joint bottom-bracket spindle system
- Bearings are installed and included with crankset, these are the crank/bearing-to-frame interface cups
- Wide-stance, overboard design: 49g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement external bottom bracket engineered with stainless steel cups and an aluminum sleeve for durability and longevity
- Manufactured with Phil Wood precision and premium Phil bearings for performance
- Replaces Shimano/FSA/RaceFace bottom brackets (no SRAM)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Requires Phil cartridge cups and installation tool (sold separately: use BTI part # PW-470* for cups, and PW-471* for tools)
- 17mm proprietary heat treated stainless steel or titanium spindle for maximum durability and minimum flex
- Phil "X" type cartridge bearing with integral, one piece shell seals out contamination
- Unique trademark cupped flats for crank arm retention
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Cups for Phil Wood bottom bracket sets
- Provides 5mm of chainline adjustment |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- X-Type external bearing system replacement cup/bearing set
- Forged 7050 aluminum cups with full complement sealed bearings and Phil Wood grease
- DH models have 35% more thread engagement than Deus/Atlas cups
- Interchangeable with Saint and FSA mountain cranks |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Three full complement cartridge bearings with two on the drive side
- High pressure contact lip seals/labyrinth seals keep out contaminants
- Lip cup useful for E-type derailleurs or BB-mounted chainguides
- Evolve-XC: 113mm hollow CrMo spindle, 15mm bolts. 235g
- Evolve-FR: 113mm hollow CrMo spindle, 12mm bolts. 285g
- Evolve-DH: 118mm hollow CrMo spindle, 12mm bolts. 305g
- Use ISIS bottom bracket tool BTI #RF-9999 for installation |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Two full complement cartridge bearings
- Labyrinth seals keep out contaminants
- Lip cup useful for E-type derailleurs or BB-mounted chainguides
- SRX: 108 or 113mm hollow CrMo spindle, 15mm bolts. 230-245g
- Use ISIS bottom bracket tool BTI #RF-9999 for installation |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Also a sub for discontinued Ultegra 6500/6503 OL5 bottom brackets
- 109.5mm bottom brackets are serviceable and allow for bearing tension adjustments
- 22.2mm hollow pipe billet spindle
- 5mm deep spline fits crank models 7700/7703, 6500/6503, 5500/5502/5503/5505: 175g/215g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Dura-Ace 7710 (NJS type) designed for DuraAce FC-7710 track cranks
- 22.2mm hollow pipe billet spindle: 244g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Dura-Ace 7800/7803 external bottom bracket cup/bearing/shield set
- Wide-stance, outboard bearing design: 95g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Ultegra-SL, color-matched 6601/6604/6650-G external bottom bracket cup/bearing/shield set
- Wide-stance, outboard bearing design: 98g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Ultegra 6600/6603/6650-S external bottom bracket cup/bearing/shield set
- Wide-stance, outboard bearing design: 98g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Also a sub for discontinued Ultegra 6500/6503 OL5 bottom brackets
- 22.2mm hollow pipe billet spindle
- 5mm deep spline fits crank models 7700/7703, 6500/6503, 5500/5502/5503/5505: 250g/259g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 105 5600/5603/5650 external bottom bracket cup/bearing/shield set
- Wide-stance, outboard bearing design: 98g
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- HollowTech-II, external bottom bracket cup/bearing/shield set for FC-R600, FC-R500, FC-4550-S, Tiagra-4550, Tiagra-4500, and Tiagra-4503 cranks
- Wide-stance, outboard bearing design for HollowTech-II cranksets |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Bottom bracket cup sets for XTR-M970 or M960 Hollowtech-II cranks
- Includes: (1ea) left and right bearing cups, center shield with o-rings, and (3) 2.5mm spacers (external sealing o-rings sold separately, use: SH-15500) |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Bottom bracket cup and shield sets for Saint M805-(83mm); M800-1/2/3, XT M760, Hone M600, and LX M580 Hollowtech II cranks
- Includes: (1ea) left and right bearing cups, center shield with o-rings, and (3) 2.5mm spacers (external sealing o-rings sold separately, use: SH-15500) |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 22.2mm hollow pipe spindle with 5mm deep spline
- Bolts sold separately. 213g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 22.2mm hollow pipe billet spindle with 9mm deep spline
- Not for Hollowtech II, XTR, or road models (except Tiagra 4401/4404; Sora 3301/3304)
- Use E-Type for DH chainguides or E-Type front derailleurs
- Upgraded spindle coating for better corrosin resistance
- Bolts sold separately |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- UN73 (XT/Ultegra-level) quality at a UN53 (LX/105-level) price
- Traditional square JIS 2-degree taper crank-arm interface
- Offered in either 68/73mm English (BC1.37 x 24tpi
- RH/LH) or 70mm Italian (M36 x 24tpi
- RH/RH) threads
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Traditional square JIS 2-degree taper |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement 42x30mnm cartridge bearing assembly for SRAM BB30 cranksets (includes c-clips and wavy washer for bearing tension) |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For fitting SRAM and Truvativ GXP cranksets to BB86 (86.5mm) press-fit, non-threaded bottom bracket shells (not for BB30, BB90, or BB92 systems)
- Left and right bottom bracket bearing cup set for use on Giga X Pipe cranks with integrated, 24mm GXP spindle
- BlackBox (hybrid-ceramic bearing) or Team (steel, sealed bearing) in press-fit design aluminum cups
- Use of a shop-quality headset press recommended for installation
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Left and right bottom bracket bearing cup set for use on Giga X Pipe cranks with integrated GXP spindle: includes plastic seal/spacer-shell with o-rings
- BlackBox (hybrid-ceramic bearing) or Team (steel, sealed bearing) with threaded aluminum cups: can also be used to replace/upgrade XR-series GXP systems
- TV-2110/2122 includes (2) 2.5mm spacers to fit either 68mm or 73mm BB shells
- Choose: English (1.37"x24tpi
- LH/RH) or Italian (M36 x 24tpi
- RH/RH) threads. torque 25-30 ft/lbs
- BB-Cup tool sold separately, use: TV-2501
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Howitzer Team: heat treated CrMo Howitzer-spline/taper spindle with M12 (crank mount) thread bore and CNC aluminum cups with plastic shell-spacer
- Fits 2006+ Holzfeller and Hussefelt cranksets with Howitzer-specific bottom bracket interface
- Dual, oversized 'external-type' sealed cartridge bearing design
- English (1.37"x24tpi
- LH/RH) threads for 68mm, 73mm, 83mm, or 100mm shell widths (also accomodates E-type or chainguide plate)
- Versions for 50/51mm chainline @ 135mm wheel spacing; 56mm chainline @ 150mm wheel spacing; or 66mm chainline @ 165mm wheel spacing: metal grey
- 365g (51mm chainline)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Howitzer XR: heat treated CrMo Howitzer-spline/taper spindle with M12 (crank mount) thread bore and aluminum cups with plastic shell-spacer
- Lighter weight version (M15 bolt: larger bore) offered for 51mm chainline (not to be used for DH/Freeride/Extreme riding)
- Fits 2006+ Holtzfeller and Hussefelt cranksets with Howitzer-specific bottom bracket interface
- Dual, oversized 'external-type' sealed cartridge bearing design
- English (1.37"x24tpi
- LH/RH) threads for 68mm and 73mm shell widths (also accomodates E-type or chainguide plate)
- Versions for 50/51mm chainline @ 135mm wheel spacing; or 56mm chainline @ 150mm wheel spacing: pitch black
- 365g (51mm chainline)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- GigaPipe Team SL: hollow CrMo ISIS-spline/taper spindle with M15 (crank mount) thread bore and aluminum cups/spacer-shell: 240g
- 3 sealed cartridge bearings: 2 drive, 1 non-drive
- English fits 68mm, 68mm E-type/Chainguide, or 73mm shell widths (only 73mm E-type/Chainguide compatible is TV-2237)
- Choose: English (1.37"x24tpi
- LH/RH) or Italian (M36x24tpi
- RH/RH) threads |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- GigaPipe Team DH: hollow CrMo ISIS-spline/taper spindle with M12 (crank mount) thread bore and aluminum cups/spacer-shell: 319g
- 4 sealed cartridge bearings: 2 drive, 2 non-drive
- English threads 1.37"x24tpi
- LH/RH fit: 68mm plus E/C; 73mm or 73mm E/C; 83mm plus E/C; or 100mm plus E/C shell widths (E/C: E-Type or Chainguide compatible)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Square LE: heat treated CrMo JIS square-taper spindle with M8 (crank mount) thread bore and CNC machined alloy cups/spacer-shell: (325g)
- Sealed cartridge bearings with single-insert stop (chainline control)
- English (1.37"x24tpi
- LH/RH) threads fit 68mm; or 68mm E-type, and 73mm shell widths (no 73mm E-type)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- PowerSpline (PS): heat treated CrMo spline-taper spindle with M8 (crank mount) thread bore and CNC machined alloy cups/spacer-shell: (325g)
- Sealed cartridge bearings with single-insert stop (chainline control)
- English (1.37"x24tpi
- LH/RH) threads fit 68mm; or 68mm E-type, and 73mm shell widths (no 73mm E-type)
|
$ |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Deda Elementi / Tre Bike Bottom Brackets
FSA Bike Bottom Brackets
Fulcrum Bike Bottom Brackets
Phil Wood Bike Bottom Brackets
Race Face Bike Bottom Brackets
Shimano Bike Bottom Brackets
Truvativ Bike Bottom Brackets
ABI Bike Bottom Brackets
American Classic Bike Bottom Brackets
Campagnolo Bike Bottom Brackets
Sugino Bike Bottom Brackets