3T Rotundo Team Carbon Bar
- Italian, Formula-1 designed full carbon fiber construction
- External cable routing groove for STI/Ergopower levers
- Extended 31.8mm bulge area for clip-on aerobars and/or accessories
- Textured brake/shifter and stem interface for a solid non-slip mount
- Traditional, round "professional" bend offers infinite positioning
- Gloss carbon finish with red/white graphics
- 192g @ 40cm: all measurements are center-to-center
|
$275.00 |
Alpha Q ProLite Road Bar
- Ergonomic center section improves grip and comfort, reduces pressure on sensitive nerves, and reduces aerodynamic drag
- Internal cable routing which is Shimano and Campagnolo compatible
- Compatible with clip-on bars, head light mounts, and computers
- 235g
|
$268.95 |
Control Tech Razor Edge Bar
- Monocoque carbon construction with shallow drop and reach
- Narrow flat top for a comfortable, natural hand and wrist position
- Reinforced, textured lever clamp areas, carbon tube cable routing. 215g
|
$202.95 |
Control Tech Carbon Comp Bar
- Monocoque structure full carbon fiber drop bar with ergo-aero shape
- Greater surface area on tops, hood-hold palm rests for reduced fatigue
- Reinforced, textured lever clamp areas, internal cable routing. 246g
|
$260.95 |
Deda Elementi Alanera Integrated Carbon Stem/Bar
- High modulus, monooque carbon fiber construction with Ti hardware
- Internal, under-wing cable routing for STI/Ergopower levers
- Anatomic shape drops with ergo-airfoil 'wing' bar-top design
- 82-degree, 1-1/8" threadless stem with detachable, 2-bolt computer mount
- Visible carbon weave with blue/red/silver graphics
- 380g @ 100mm/42cm: drop/reach/stem are measured center-to-center, bar width is measured outside-to-outside
|
$688.95 |
Deda Elementi Phazer Racing Carbon Bar
- Full, carbon fiber composite construction with internal cable routing
- Formed bulge areas on the drops (with integrated grips) and by the hoods (power egg) for improved positioning and ergonomics
- Aero, drop-wing shaped top profile with a shallow, round bend for on-the-drops comfort and control
- Racing version: gloss carbon with white 'barcode' graphics
- 210g @ 42cm: drop/reach are measured center-to-center, width is measured outside-to-outside
|
$551.95 |
FSA Plasma Compact Bar/Stem Combo
- Compact version of FSA's integrated anatomic carbon bar/stem combo
- Aero-ergo flat-top riser center section with natural arc
- Reinforced, textured lever clamp areas. 4GC carbon/alloy steerer clamp
- Control Center computer mount not included, use part number FS-4799
- Internal cable routing. Not clip-on compatible
- 370g @ 100mm/40cm (width measured center to center)
|
$659.99 |
FSA K-Force Compact Road Bar (2009)
- Compact shape with reduced drop/reach for riders seeking improved comfort
- Continuous carbon/Kevlar composite construction
- Double width single internal routing groove
- Reinforced stem clamp area, 120mm wide for attaching clip-ons
- Updated red and white K-Force graphics
- 210g @ 40cm (width measured center to center)
|
$289.99 |
ITM WingShape Carbon Bar
- Carbon wrapped, butted and shaped 7075-T6 aluminum (carbon in non-tape areas)
- Wing-shaped tops provide better pressure relief and positioning
- Double-groove routing for STI/Ergopower levers
- Anatomic bend for on-the-drops comfort and control
- 290g @ 42cm: all measurements are outside-to-outside
|
$150.00 |
ITM K-Sword Carbon Wing Bar
- Monocoque carbon fiber construction with differentiated layering
- Wing-shaped tops provide better pressure relief and positioning
- Hyper-anatomic shape and dual, internal cable routing for STI/Ergo levers
- 260g @ 42cm: all measurements are outside-to-outside
|
$375.00 |
Nitto Neat Mod. 186 STI Bar
- Shallow drop bar with anatomic bends, cable grooves
- Drops designed for comfortable STI shifter/brake operation
- All Nitto bars are measured center to center
|
$108.95 |
Nitto B135 Randonneur Bar
- Classic randonneur touring style, also great for cyclocross and dirt drop riding
- Bar slopes upward from the center to the corners, the drops are splayed outward
- A randonneur is a participant in a randonnée or brevet
- a long-distance ride that passes through check-points within a specified time limits. It is not a race, but a test of endurance with distances of 200-1000 km
- All Nitto bars are measured center to center
|
$37.95 |
On One Mungo Moustache Road Bar
- Wide shot peened 6061 aluminum with lots of hand positions
- Moustache Road bar calls for a shorter stem than used with drop bars
- Recommended for use with STI road shifters and cantilevers or short arm linear brakes
|
$52.95 |
Oval Concepts R910 Aergo Carbon Bar
- Aerodynamic and ergonomic super flat aero tops with ergo grips
- One-piece carbon fiber with no joints, creases or stress risers
- IKT internal Kevlar safety mesh woven into carbon fiber
- RCT (Rough Clamp Technology) no-slip material at the brake lever and stem clamp points, reduces required torque on clamps
- 260g @ 42cm (width measured center-to-center)
|
$329.00 |
Oval Concepts R900 Carbon Road Bar
- High thread count carbon fiber with IKT Kevlar reinforcement
- R50 bend on top and in drops increases hand room by 15%
- Deep single groove for single or double cable routing
- Textured, no-slip lever mount area
- 210g @ 42cm (width measured center-to-center)
|
$209.00 |
Race Face Next-SL Carbon Road Bar
- Highly engineered 3K carbon fiber bar with rounded anatomical bends
- Wide 31.8mm center section for added stiffness and clip-on compatibility
- Double cable routing grooves for compatibility with most shifting systems
- 215g (width measured center to center)
|
$173.95 |
Race Face Revolution Road Bar
- High fatigue tested, butted 7075 aluminum with ergonomic bends
- Wide 31.8mm center section for added stiffness and clip-on compatibility
- Double cable routing grooves for compatibility with most shifting systems
- 240g (width measured center to center)
|
$53.95 |
Ritchey WCS Carbon Evo-SL Road Bar
- Features monocoque unidirectional carbon (lighter than 3K carbon weave)
- Shallower drops, flatter hood-hold position, 3 degree sweep for ultimate comfort
- Aerodynamic flat-top carbon road bar with anatomic bend in drops
- Textured stem and shifter areas prevent slippage, cable guides hidden under the tops
- 38cm width has shorter reach for smaller riders
- 220g @ 42cm (width measured center-to-center)
|
$384.95 |
Ritchey WCS Carbon Streem Road Bar
- Aerodynamic flat-top carbon road bar with anatomic bend in drops
- Monocoque continuous carbon fiber construction for strength
- Textured stem clamp and shifter areas prevent slippage
- 230g @ 42cm (width measured center-to-center)
|
$384.95 |
Soma Major Taylor Track Bar
- Named in honor of Marshall "Major" Taylor
- Chrome-plated Tange steel
- Replica of a 1930's bar that has been hanging on display in legendary Oscar Juner's old shop in San Francisco
- Measured center-to-center
|
$36.95 |
Soma Walker Racer Track Bar
- Named after Don Walker, an Australian champion racer and good friend to Marshal Major Taylor
- Chrome-plated Tange steel
- The drops have a 7 degree flare with very little reach. Measured center-to-center
|
$39.95 |
Syntace Racelite Carbon Bar
- A bar that combines light weight, comfort and strength in one package
- Carbon fiber layers in a variable load-depend diameter for a safer bar
- Ovalized flat-top with 6 degree backsweep and anatomic drops
- Ti-mesh in the stem/aero bar clamp areas to distribute clamping forces
- Drops down less towards the brake levers than earlier models
- 178g @ 44cm (width measured outside-to-outside)
|
$297.00 |
Torelli Bormio Bar
- Made from lightweight, high strength double butted 7075 aluminum alloy
- Anatomical design for comfort on both the drops and tops
- 255g @ 42cm: measured center-to-center
|
$47.95 |
Truvativ Team Aero Road Bar
- Cold drawn and triple-butted 7050-T6 aluminum
- Aerodynamic, airfoil shaped tops for enhanced ergonomics
- Anatomic shaped drops and external, bottom-routed cable groove
- 270g @ 42cm (all measurements are center-to-center)
|
$67.00 |
Truvativ XR Road Bar
- Cold drawn and triple-butted 66 aluminum
- Anatomic shaped drops and external, front-routed cable groove
- 275g @ 42cm (all measurements are center-to-center)
|
$34.00 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|