Williams Snap Ring Pliers
- Internal: used for installing and removing internal retaining rings
- External: used for installing and removing external retaining rings
- Manufactured from high carbon heat treated steel
- Finished with black oxide coating
|
$21.72 |
Manitou SPV/SFS/ISX Volume Adjuster Tool
- 16mm hex/socket tool for adjusting volume-adjuster depth on tool-adjustable Manitou SPV/SFS/ISX and Progressive 5th-Element rear shocks
- 1/4" drive with 6 depth markings for accurate setting measurement
|
$20.00 |
Manitou Bushing Tools
- Bushing sizer-plate/clip are for removing and installing bushings for Manitou forks and must be used in conjunction with AP-852532 and/or AP-852533 (base tool kits)
|
$36.95 |
Marzocchi Bushing Tools
- For replacing pre-pressed stanchion bushings on Marzocchi forks with 1-piece cast magnesium legs
- 2002 and prior do not require special tools for bushing replacement
|
$33.95 |
Motion Pro Fork Oil Level Gauge Tool
- For checking/adjusting internal oil-heights on suspension systems from 0-300mm
- Graduated hollow-metal tube attaches to hose & 60ml syringe for adding/drawing oil to/from suspension systems to set specified oil heights
- Top-of-leg cap with set-screw positions graduated tube for proper measuring
|
$27.95 |
Park Tool Oversized adjustable Cutting Guide
- Accurately guides hacksaw to cut steerers, integrated seatposts, airfoil shaped seatposts and round tubes
- Airfoil posts up to 3.5" (89mm)
- Round tubes from 1"(32mm) to 1 3/4" (45mm)
- Steel hardened body and molded contact pads to protect tubes and frames
|
$27.95 |
Park Tool Threaded Steerer Cutting Guides
- Shop quality cutting guide for threaded steerer tubes
- PK-6216: fits 1" x 24TPI threaded fork steerer tubes
- PK-6217: fits 1-1/8" x 24TPI threaded fork steerer tubes
- Dual, steel guide plates affixed with extended vise tip
- Insert steerer, cut to length, and clean threads on removal
|
$21.95 |
Rock Shox Bushing and Seal Tools
- Bushing removal plates upgrade older, and newer removal tools to pull 30/32/35/40mm bushings (current puller comes with 28/30/32mm plates)
- Bushing installer sleeve kits work in conjunction with installer bases for 28/30mm or 32/35/40mm Rock Shox bushings
- Seal installers help drive/seat seal into leg without damaging seal or casting
|
$13.95 |
Stein Threaded Steerer Cutting Guides
- Double-plated cutting guide installs with fork in frame
- Used with top locknut removed for accurate length cut
- Hacksaw squarely cuts steerer between guide plates
- Removal of tool cleans threads
|
$26.95 |
Stein 1" and 1-1/8" Threaded Steerer Cutting Guide
- Simplified (L) single-plate cutting guide for 1" and 1-1/8"
- Can be used in a vise or on fork installed in frame
- Hacksaw supported on only one side of guide
- Removal of tool cleans threads
|
$21.95 |
UDG Shock Bushing Install/Removal Tool
- Bushing tool machined from 6061-T651 aluminum billet and anodized to decrease wear
- Designed to be used in a bench vise for installation and removal
- UD-3200: For use with the 16mm I.D. bushings (The standard DU Bushing (0.5 in. I.D., 19/32 in. O.D., & 0.5 in. length) will fit Fox, Cane Creek (AD-10, AD-12, & Cloud Nine), Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (Monarch & Vivid), and X-Fusion H3 Shocks -UD-3203: The metric DU Bushing (12mm I.D., 14mm O.D., & 12mm length) will fit Answer Manitou, Rock Shox (Bar, Ario, MC3, MC3R, & Pearl), and X-Fusion (Vector, O2, & Glyde) Shocks
|
$31.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|