Bike Grips and Bike Tape products
|
DMR Loc'd Grips
- Kraton rubber DMR DD logo pattern, staggered in height for added grip
- Easy to install via two set screws that clamp via an alloy ring/steel sleeve expander, which firmly grips the bar without damaging it
- Soft outer rubber also grips the bar through windows in the stiff plastic core to eliminate twisting
- Micro flange for added steering control without shifting conflict
|
$11.95 |
|
Ergon GR2 Grips with Carbon Bar End
- Compact, lightweight 3-finger full carbon fiber bar end
- Wide, ergonomic grip shape prevents numbness and fatigue by supporting more of the palm and reducing pressure on the ulnar nerve
- Integrated clamp secures grip on bar with just one screw
- Bar end and grip platform adjust independently for custom fitting
- Unisex grips with 2 sizes to fit small or large hands and 2 lengths for standard shifters or twist shifters
|
$119.95 |
|
Ergon GP1 Grips
- Wide, ergonomic grip shape prevents numbness and fatigue by supporting more of the palm and reducing pressure on the ulnar nerve
- Integrated alloy clamp secures grip on bar with just one screw
- Unisex grips with 2 sizes to fit small or large hands and 2 lengths for standard shifters or twist shifters (no bar ends)
|
$29.95 |
|
Ergon GE1 Grips
- Designed for technical riding that demands more hand position options
- 4 different surface structures optimize friction values
- Forged alloy clamp with integrated clamp booster for secure grips
- Unisex grips with 2 sizes to fit small or large hands (small grip is 6mm shorter than large, slightly smaller diameter) (no bar ends)
|
$29.95 |
|
Gusset Bastard Grips
- 130mm long bastard file-type knurling pattern, thin-wall soft rubber
- Short flange for BMX or Mtn, open end, plastic expander plugs included
|
$7.95 |
|
Intense Lock-On Grips
- Aluminum clamps secure the grip on both ends using hex wrench
- Loosen pinch bolts and grips slide on or off with ease
- Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
|
$11.95 |
|
ODI Lock-On MTB Bonus Pack
- Aluminum clamps secure the grip on both ends using hex wrench
- Loosen pinch bolts and grips slide on or off with ease
- 130mm length for standard shift/brake setup (not for twist shifters = use 90mm replacement grip options for twist shifters)
- Bonus pack includes Lock-On grips, clamps, and with new Snap Cap end plugs
- Gold is a Limited Edition run
|
$20.95 |
|
ODI Lock-On MTB Grips Only
- Rigid plastic grip core interlocks with clamps on either end
- Two sizes available: 130mm for standard, or 90mm for twist shifters
- Includes end plugs
|
$11.95 |
|
ODI Lock-On Grip Clamps
- Aluminum clamps secure the grip on both ends with hex bolts
- For 22.2mm (7/8") bars
- Now with new Snap Cap end plugs
|
$12.95 |
|
ODI Lock-On BMX Grips Only
- Grips take standard MTB/BMX Lock-On clamps, have flexible flange
- Alloy clamps interlock with grips rigid inner plastic core
- Thin profile with soft file type grip surface
- Includes plugs
|
$11.95 |
|
ODI Lock-On BMX Bonus Pack
- Solves grip slippage by using aluminum pinch clamps on both ends
- Alloy clamps interlock with grips rigid inner plastic core
- Thin profile with soft file type grip surface
- Includes grips, plugs and Lock-On clamps
|
$18.95 |
|
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
$9.75 |
|
OURY Flanged Grips
- Thick profile and raised square blocks with a sticky feel
- Classic Oury grip with motocross style flange
|
$9.75 |
|
OURY Lock-On Grips
- Rigid plastic grip core interlocks with clamps on either end
- Bonus pack includes aluminum clamps and end plugs
|
$13.15 |
|
Pedros Dot Grips
- Made of 65% recycled material
- Raised and textured Oval-dot pattern provides a more positive hold and better comfort for extreme riding
|
$7.95 |
|
Race Face Good-n-Evil Grips
- Dual density compound with soft outer grip and firm inner core
- Ergonomic shape is thicker at mid-section. Closed end
|
$10.95 |
|
Race Face Diabolus Lock-Ons
- Dual density compound with soft outer grip and moto grip flange
- Rigid plastic grip core interlocks with clamps on either end
- 130mm length, black clamps included
- Replacement grips without clamps available to fit any ODI Lock-On clamps
|
$11.95 |
|
S&M Lock-On Flanged Grips
- Alloy clamps interlock with grips rigid inner plastic core
- Low, flexible flange. Thin profile with ribbed surface, 143mm long
- Bonus Pack includes black clamps and grip-overlapping end plugs
|
$11.95 |
|
SRAM Stationary Grips
- SRAM Racing grips: stationary, bar grips (not shifter grips)
- 60mm: HalfPipe, 110mm: Shorty, 130mm: Triggers
|
$6.00 |
|
Sunline Logo Lock On Grips
- Mid-size flange for better feel and more control
- Locking mechanism is hidden in the flange
- Aluminum bar cap is part of the grip
|
$17.95 |
|
Syntace Screw-On Gripz
- Non-slip, dual-density Kraton exterior with a one-bolt locking system
- Grips can be installed and removed in seconds with a hex wrench
- Can be cut down for use with twist shifters. 92g/pr
|
$24.00 |
|
THE Vice Grips
- Anatomically designed locking grip with alloy clamps and allen bolts
- 3-way convertible flanges including large BMX, half cut, and reducer
|
$18.95 |
|
Velo ViseGrips
- Hex screws and aluminum clamps secure grip to bar without adhesives
- Polypropylene inner sleeve covered with soft Kraton Gel
|
$5.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|