if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Plastic, double-faced mallet with wood handle
- Great for low-inpact, non-marring applications
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Heat-treated tool steel with centerless-ground ends
- 4" long with knurled bodies offer solid grip
- First (4) have 3/4" drive length, last (4) have 1" length
- Contains 8 individual punch sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", & 5/16", vinyl case
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Lightweight aluminum body with long lasting steel parts
- Unique ball-bearing action for precise punch markings
- 5" Overall Length; 5/8" body diameter
- Replaceable all-steel point (GT-0078) |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Smart Hammer: shot-loaded, dead blow technology virtually eliminates rebound and user fatigue
- Nuplaglas handle with CS grip for optimum power and life
- Orange handle/head with non-marring striking faces
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Nuplaglas handle with CS grip for optimum power and life
- Oversized rubber mallet head
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement 1.5" brass striking face for Nupla Impax hammer
- This tip is not included in the set |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Nuplaglas handle with std grip for optimum power and life
- Ball Pein hammer head
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Shop quality hammer with fiberglass reinforced handle and soft grip
- One-piece, two sided head with both steel and rubber striking surfaces
|
$ |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Nupla Bike Hammers and Bike Punches
Park Tool Bike Hammers and Bike Punches