Bike Headset Tools

FSA Bike Headset Tools

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Star nut treads onto driver. Driver slides up into guide tube - Guide tube fits over outside of 1 1/8" steerer - Hammer on round end of driver until steerer contacts driver-stop - Star nut is properly aligned and seated a consistent depth

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Stainless steel measurement tool has gauges for all current headset bearing standards (Campagnolo, Cane Creek, TH/FSA) - Includes inside gauges for headtubes and cups and outside gauges for bearings - Also has M5 and M6 bolt gauge. For both 1" and 1-1/8"

$

Park Tool Bike Headset Tools

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- 4-pronged flared end fits most headset cups - Heat treated, nickel plated steel construction - Steel cap-insert accepts a lifetime of hammer blows - PK-6100 fits 1", 1-1/8", 1-1/4" headset cups, PK-6102 fits 1-1/4" and 1.5" cups

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- For replacement or retrofit to older bearing press tools - Multi-step adapters fit most press fit cup applications - Sold as pair

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Simple and economical bearing cup press for the home mechanic - Will also work for installing one piece bottom bracket cups

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Precision tool for removing headset, fork crown races - Fits 1", 1-1/8", 1-1/4", and One.Five steerer tubes - Nickel-plated steel construction - T-Handle controlled, thin edge crown race wedges (replacement wedges available from Park Tool) - T-Handle puller gently separates crown race from fork (no more hammer & punch)

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Precision tools for installing headset, fork crown races - PK-6161: 1" and 1-1/8" crown-races/steerer-tubes (Includes: (3) black 1" crown race seating adapters (3) blue 1-1/8" crown race seating adapters) - PK-6163: specifically for installing 1.5" crown races - Steel tube with steel hammer cap insert for driving - Aluminum seat adapters provide precise race alignment - #838 red: 1-1/8", 1-1/16" Klein Aeros/Trek Superlight composite fork crown race adapter available separately

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Solid, knurled steel construction (5-3/8" long) - Step-down guide with replaceable threaded fixing screw - Sets threadless steerer star-nuts to a depth of 15mm

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Uses a built in slide-hammer guide for installation of 1" and 1-1/8" star nuts - Proper star nut alignment and depth every time - Replaceable set screw (#822)

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- For use with the HTR-1 head tube reaming/facing set - Can be used in conjunction with #690 facing cutter for 2-in-1 operation

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Designed for reaming and facing Integrated headset frames (41.0mm x 45degree angular bearing contact) - Includes (2) reamer/facer cutters: (1)-lower, (1)-upper - For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter - Combined reaming/facing cutters for 2-in-1 operation

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Designed for reaming and facing Campagnolo Hiddenset and other frames using 42mm bearings with a 45-degree angular contact - For use with the HTR-1 head tube reaming/facing set and the #750 XL centering cone adapter - Combined reaming/facing cutter for 2-in-1 operation

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Oversized headset facing cutter for HTR-1 tool set - Designed for larger, low profile head tubes (Zero Stack) - Use with (#768 43.8mm pilot) and (#750 centering cone).Sold individually

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Oversized headset facing pilot for HTR-1 tool set - Designed for larger, low profile head tubes (Zero Stack) - Use with (#690-XL facing cutter) and (#750 centering cone). Sold individually

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Oversized adapter for centering cone on HTR-1 tool set - Designed for larger head tubes (0-Stack, Integrated, 1.5) - Use with (#690-XL facing cutter) and (#768 43.8mm pilot) or (#756S/758S reamer/facer sets). Sold individually

$

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Reamer extension for use on the HTR-1 tool set - Increases depth on 2-piece reamer/facers (1", 1-1/8", 1-1/4") to 27mm - Designed for deep-insertion headset cups (Chris King Steelset). Sold individually

$

Pedros Bike Headset Tools

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Compact star nut setting tool with guide to ensure proper nut installation - For 1" and 1 1/8". Lifetime warranty

$

Woodman Bike Headset Tools

if($product_counter==3) { if($count_products>0) echo "

$count_products more products available from ".$categoryname."

"; break; } $product = $data->index('product_data', $current_product['categoryproductid']); ?>

- Steel construction for durability in the bike shop or the garage - Includes stepped bushing for any size headset (1"-1.5")

$

Cane Creek Bike Headset Tools

Featured products

• Delta Airzound Bike Horn 
  - 115 decibel horn with volume control switch
  - Mounts to most handlebars. No batteries needed
  - Air reservoir is easily refilled with any bike pump
  - Extension allows for more versatility when mounting system
• Campagnolo BIG Corkscrew 
  - A true classic, and symbol of genius for an iconoclastic brand
  - Patented telescopic, self-aligning system always centers the screw in the center of the cork
  - Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
  - Includes a wooden case with vinyard-esque packing material
• Kenda Standard Butyl Tube 
  - Standard .85mm wall thickness butyl tube
• Maxxis Xenith 26" Tire 
  - Mountain bike specific slick tire for 26" cross training
  - 60 tpi casing, 70a durometer: Durable, fast rolling compound
• Planet Bike Freddy Fenders Hardcore Fender Set 
  - Superflex unbreakable all-weather polycarbonate
  - Pre-installed stainless steel hardware with mud flaps
  - Includes all hardware for mounting to virtually any bike
• OURY Grips 
  - Thick profile and raised square blocks with a sticky feel, 98g