if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Machined aluminum hub shell with labyrinth seals and sealed cartridge bearings
- Front uses 10mm aluminum internal axle
- Rear uses 10mm steel axle and 8/9 speed freehub with patented quad-sealed cartridge bearing system
- Q/R skewer available separately
- 150g/373g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Aluminum shell and freehub with 10mm steel axle
- DT-Swiss patented, star-ratchet mechanism: Shimano 8-10 speed
- Labyrinth seal system with quad, sealed cartridge bearings
- Q/R skewer available separately
- 335g: black with chrome graphics |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Forged aluminum shell with 15mm aluminum axle
- Features DT-Swiss patented, star-ratchet mechanism
- Contact free flange seals with stainless steel cartridge bearings
- Q/R skewer available separately
- 108g/223g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- InI = patent pending cog interface on both sides of the hub
- Swap the hub from track bike to mtb, swap the spacers, flip the cog over and have everything line up
- High flanges so you can repair a broken spoke on the drive side even if you are running a large cog
- Same spoke length front and rear, left and right
- Completely serviceable using standard tools (bearing #6902)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 6061 aluminum shell with oversized 7075 aluminum axle
- Adjustable double sealed cartridge bearings and labyrinth seals. 135g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 6061 aluminum shell with oversized 7075 aluminum axle
- Adjustable double sealed cartridge bearings and labyrinth seals
- Wide canted flanges build a no dish wheel
- Large 8mm bolts and knurled washer face for maximum hold
- Accepts 24tpi BMX freewheels. 195g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Hollow stainless axles with retro high flanges
- Flop-Flop rear is fixed one side and freewheel other
- Stainless mount screws and washers with front and rear(lockring included)
- Front 100mm and rear available in 120mm or 130mm
- 270g, 390g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Aluminum shell with 15mm precision-ground axles
- Phil-Spec'd sealed precision cartridge bearings
- Super reliable, strong and easy to service
- Quick release skewer not included |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 14 speed internal rear hub drivetrain system shifts under load
- Reliable, low maintenance internal design for reduced wear
- Highly efficient with no gear overlap and maximum ratio range
- Shift indexing originates at the hub, instead of the shifter
- Recommended to be laced 2-cross
- Includes 14sp twist shifter, 16t cog, cables/housing. 1742g
- RH-8000: XC includes chain tensioner
- RH-8013: TS designed for horizontal dropout |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Non-disc hubs for use with rim brake wheel applications
- Cubic Boron Nitride treated cones and races with stainless steel ball bearings and an updated sealing system
- Oversized aluminum axles with a rear 8/9sp titanium freehub body (updated cassette mechanism has 125% faster engagement over M960)
- Quick release included: front hub radial lacing approved (135g/290g)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Smooth finish borozon treated races, 10mm hollow steel axles
- Front: radial lacing OK. 8/9 speed freehub body. 158g/376g: quick release included
|
$ |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Paul Components Bike Non-Disc Hubs
Phil Wood Bike Non-Disc Hubs
Rohloff Bike Non-Disc Hubs
Shimano Bike Non-Disc Hubs
DT-Swiss Bike Non-Disc Hubs
Level Components Bike Non-Disc Hubs