if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- AD-4 seal kits are only available directly through Cane Creek |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Maintenance/seal kit for DT rear air shocks
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Remote (shifter-style), handlebar mounted, platform adjuster kit for the DT EX 200 and HVR-200 rear platform/air shock
- Replaces platform adjuster knob on shock with wheel. 36g |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- For mounting 1 end of DT Swiss SSD series rear shock to frame
- Stepped spacers provide a solid mount interface with frame (larger widths thread together with center sleeve)
- Sized by bolt diameter (M6 or M8) and frame mount-ID width (in mm)
- 2 hardware kits required per shock, 1 per each eyelet |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 2 machined aluminum spacers (some kits may include a sleeve) for mounting 1 end of Manitou rear shocks (air or coil)
- Sold as a set of 2 spacers: 2 sets required per shock, 1 per each eyelet
- Sized by bolt diameter (M6 or M8) and frame mount ID width (in mm)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Designed for Manitou rear/frame shocks: black painted, chrome-silicon steel: listed by travel/stroke and pound rating
- 1.50" stroke springs have a 90-95mm free length
- 2.00" stroke springs have a 120-125mm free length
- 2.25" stroke springs have a 125-130mm free length
- 2.50" stroke springs have a 150-155mm free length
- 2.75" stroke springs have a 160-170mm free length
- 3.00" stroke springs have a 160-170mm free length
- 3.50" stroke springs have a 180-195mm free length
- **700lb and 750lb springs are only compatible with the Metel rear shocks (no Swinger-Coil models)
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Revox-level No-Tool SPV/SFS/ISX upgrade adjuster for all Swinger shock models with a piggyback reservoir (Coil 4-Way, 6-Way and Air 4-Way)
- Red anodized aluminum construction with hand-adjustable SPV/SFS/ISX knob and air pressure access |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 3-piece hardware kit: stainless sleeve with aluminum spacers for mounting 1 end of Marzocchi Roco-series shocks *(2 hardware kits required per shock)
- Sized by bolt diameter (M6 or M8) and frame mount-ID width (in mm)
- Also fits Progressive Coil and Fox shocks with 1/2" eyelet bushings
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Chrome-silicon steel coil designed for Marzocchi rear/frame shocks
- Also fits most Fox, Progressive, and Manitou shocks (check sizing information for possible fitment before purchasing)
- All springs have a 1.40" (35.5mm) ID and a 2.19" (55.6mm) maximum OD
- 2.00" stroke springs have a 4.85" (123.5mm) free length
- 2.25" stroke springs have a 5.36" (136.5mm) free length
- 2.50" stroke springs have a 5.85" (149.0mm) free length
- 2.75" stroke springs have a 6.35" (161.5mm) free length
- 3.00" stroke springs have a 6.85" (174.0mm) free length
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Required spacer for Progressive 5th Element Shocks when using a 275-400# Renton titanium spring |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Constructed from proprietary titanium alloy
- 1.43" inner diameter fits most Manitou, Marzocchi, Cane Creek or Progressive shocks
- 275-400# springs require spacer (RT-1000) when used with Progressive shocks
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Constructed from proprietary titanium alloy
- 1.38" inner diameter fits Fox DHX shocks
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement Rear-Maxle assembly for Maxle compatible frames |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement seal, bushing, o-ring, and bottom-out/negative-bumper kits for servicing Rock Shox rear shocks (pre 2008 oil-damper units are non-servicable) |
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Powdercoated rear shock springs for Rock Shox and most other coil shocks
- Always verify shock stroke (travel) and desired spring rate before ordering (use 1.5" inplace of 1.65")
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 3-piece design hardware for mounting 2008+ Rock Shox rear shocks with 1/2" (12.7mm) eyelet dimensions *(not for 03-08 with 12mm hardware)
- 1/2" "industry standard" hardware is also used on, and cross-compatible with, Marzocchi, Cane Creek, Fox, and Progressive rear shocks
- Sized by bolt diameter (M6 or M8) and frame mount-ID width (in mm)
- 2 hardware kits required per shock: 1 for each eyelet
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- 3-piece design hardware for mounting 2003-2008 Rock Shox rear shocks with 12mm eyelet dimensions *(not for 2008+ with 1/2" (12.7mm) hardware)
- Sized by bolt diameter (M6 or M8) and frame mount-ID width (in mm)
- 2 hardware kits required per shock: 1 for each eyelet
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Designed for Rock Shox Vivid rear/frame shocks
|
$ |
if($product_counter==3) {
if($count_products>0) echo " ";
break;
}
$product = $data->index('product_data', $current_product['categoryproductid']);
?>
- Replacement eyelet bushing for rear shocks: sold each
- Glass-reinforced polymer material (replaces metal-backed DU-style)
- CM-2004: Marzocchi, Fox, Progressive 16mm OD *(no Progressive air models or Fox Vanilla DH)
- CM-2005: Manitou specific (12mm OD)
|
$ |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|
Manitou Bike Shock Parts
Marzocchi Bike Shock Parts
Renton Coil Springs Bike Shock Parts
Rock Shox Bike Shock Parts
Cane Creek Bike Shock Parts
DT-Swiss Bike Shock Parts