Alpha Q ProLite Stem
- ProLite stem is in a league of its own, with Q-wall technology
- Extra material is used along the sidewalls to increase torsional stiffness without any reduction to vertical compliance. This ensures a smooth ride over rough roads while resisting the twisting load of climbing and sprinting
- 7075 alloy with advanced 3-D forging process
- Flip-floppable. 100g-110g
|
$42.99 |
Axiom DH Stem
- Welded A5 aluminum for optimal strength vs. weight. 4-bolt faceplate
- 190g
|
$24.95 |
Axiom XC Stem
- One-piece cold forged A5 aluminum for optimal strength vs. weight
- 4-bolt faceplate. 170g
|
$17.95 |
Azonic Revenge Stem
- CNC machined 6061 aluminum, 6 bolt bar clamp, 307g (40mm)
- Formerly called the Aggro stem
|
$49.99 |
Blackspire Big Block Stem
- One-piece CNC machined 6061 aluminum
- 4-bolt faceplate (25.4mm), 6-bolt faceplate (31.8mm). 295g
|
$50.95 |
Control Tech Unit Carbon Stem
- Torsionally rigid hollow monocoque carbon composite construction
- 6/4 titanium hardware, 4-bolt carbon bar clamp. 136g
|
$217.95 |
Deda Elementi Newton 31 Road Stem
- 1-piece, CNC machined 2024-T3 aluminum main body construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- Flip-flop design for 82-degree or 98-degree use
- 1" threadless or quill-spud adaptable (parts available separately)
- 125g @ 120mm: matte black/silver with screened flip-flop graphics
|
$137.95 |
Deda Elementi Newton Pista Stem
- 1-piece, CNC machined 2024-T3 aluminum main body construction
- 6/4-titanium hardware with removable, 4-bolt aluminum faceplate
- Deep drop 67 degree angle for track use
- 1" threadless or quill-spud adaptable (parts available separately)
- 125g @ 120mm: matte black/silver with screened silver/white graphics
|
$159.95 |
DMR Headstock Stem
- Premium quality, CNC machined stem ideal for hardcore riding styles
- Twin collet locking system means there are no bolts or weak points at the rear of the stem
|
$57.95 |
FSA OS-99 CSI Stem
- Lightweight 3K carbon wrapped, forged, CNC machined 7050 aluminum
- 6/4 titanium hardware. Flip-flop graphics. 4-bolt alloy faceplate. 2-bolt steerer clamp. 118g
|
$179.99 |
FSA OS-99 Stem
- Superlight near-net forged, CNC machined 7050 aluminum
- All sharp edges have been radiused to eliminate stress concentrations
- 6/4 titanium hardware (washers and counterbores are all radiused too)
- 4-bolt alloy faceplate. 2-bolt diagonal cut steerer clamp. 98g
|
$109.99 |
Funn Rippa Stem
- Forged, CNC machined 6061 aluminum
- 4-bolt bar clamp. 2 opposing bolt steerer clamp
|
$28.95 |
Gravity Lite Stem
- Freeride strong CNC machined aluminum
- 4-bolt CNC 2014 alloy front clamp with CrMo hardware. 195g (90mm)
|
$89.99 |
Gravity DH Stem
- Cold-forged, CNC machined AL6061/T6 with ball-milled CNC detail
- 46mm tall 3-bolt steerer tube clamping and 4-bolt cold-forged front clamp
- 290g
|
$69.99 |
Gusset Fat SOD Stem
- Internally and externally CNC machined 6061 aluminum
- Extra wide 50mm faceplate with four 6mm stainless steel bolts
- Opposing bolts on steerer clamp (45mm stack). 275g
|
$74.95 |
Hope Stem
- 1-piece, CNC'd 2014-T6 aluminum construction with 3D milling relief
- Opposed 2-bolt steerer clamp with 4-bolt removable faceplate
- Compatible with Hope stem-mount lighting kits *(faceplate for mounting light and battery pack sold separately: see lighting section)
- 165g (110mm)
|
$91.95 |
Interloc F4 Riser Stem
- Cold forged TIG welded aluminum for Mountain and Road
- Opposing 2 bolt clamp with 4 bolt face plate. 185g
|
$33.95 |
ITM Uniko-White Carbon Road Stem
- Silver-mesh carbon fiber weave
- High-modulus carbon fiber construction with differentiated layering
- Patented GWS (grip wedge system) internal bar and steerer clamp (eliminates external pinch bolts and slotted clamps)
- Includes carbon stem/steerer cap and 1" steerer reducer shim
- 155g @ 100mm
|
$361.95 |
ITM 100% Road Stem
- CNC machined 7075 aluminum for the ultimate in lightweight strength
- 2-bolt steerer clamp (38.4mm height) with a 4-bolt removeable faceplate
- Quill-spud adaptable: 1-1/8" threadless to 1" quill (available separately)
- Includes reducer shim for use with 1" threadless steerers
- 99g @ 100mm: gloss black and white finish with red graphics
|
$320.00 |
Kalloy Uno Upshot Stem
- High rise 2D forged aluminum stem for comfort
- 4-bolt windowed faceplate, 40mm tall steerer clamp. 170g (75mm)
|
$14.95 |
Kalloy Uno Jump Stem
- Stubby 2D forged aluminum stem for dirt jump and freeride use
- 4-bolt windowed faceplate, 51mm tall steerer clamp. 200g
|
$14.95 |
Nitto Jaguar Alloy Track Stem
- Professional quality forged aluminum Track racing stem with extra drop
- Features the Japanese Keirin racing (NJS) certification, 22.2mm quill. 280-320g
|
$92.95 |
Nitto Pearl NJS Track Stem
- Professional quality forged aluminum Track racing stem
- Features the Japanese Keirin racing (NJS) certification, 22.2mm quill. 300-395g
|
$76.95 |
Oval Concepts R900 Carbon Stem
- Structural carbon body fused to superlight net shape, 3-axis cold forged, 2014 T-6 core
- Reverse Bolt Technology (RBT) has bolts thread into the faceplate for improved strength and aerodynamics
- Compatible with all Oval SCCS Stem Clamp Clip-on Systems
- Forged alloy front cap, stainless steel bolts with blue Loctite
- 44mm, 4 bolt clamp reduces flex, rounded edges cradle exotic bars
- Bias cut & opposing bolts cradle carbon steerer for added safety
- See stem accessories for aero carbon nose and tail cap upgrades
- Stem can be flipped: 84 degree to +/
- 6 degrees. 120g
|
$149.00 |
Oval Concepts R700 Stem
- Net shape, 3-axis cold forged 7075 T6 aluminum
- Reverse Bolt Technology (RBT) has bolts thread into the faceplate for improved strength and aerodynamics
- Compatible with all Oval SCCS Stem Clamp Clip-on Systems
- Stems can be flipped: 84 degree to +/
- 6 degrees; 73 degree to +/
- 17deg
- 43mm wide clamp. 125g
|
$89.00 |
Promax Adjustable Quill Stem
- Forged aluminum with 0-50 degree adjustable angle
- Not recommended for jumping or aggressive offroad riding
|
$14.95 |
Race Face Deus-XC Stem
- 3D forged 7050 aluminum for high strength and high fatigue resistance
- 4 bolt face plate, 2 bolt steerer clamp. 125g (110mm)
|
$65.95 |
Race Face Atlas-AM Stem
- Light enough for Cross Country, but designed for Freeride
- CNC machined from 6061 aluminum with interlocking 4-bolt face plate
- Opposing 2-bolt steerer clamp. 190g (110mm)
|
$72.95 |
Ritchey WCS 4-Axis Matrix Stem
- Matrix carbon-over-alloy for best strength to weight ratio, 3x stronger than alloy alone
- The alloy reinforces the carbon, the carbon reduces fatigue to the alloy
- Contoured narrow 4-bolt pinch clamp prevents crushing lightweight bars
- Bias-cut steerer clamp prevents damage to lightweight steerers
- 31.8mm bar clamp also useable for lightweight Mountain bikes (6 deg)
- Titanium bolts. 130g
|
$199.95 |
Ritchey WCS 4-Axis 44 Stem
- 4-Axis technology with wider faceplate (44mm) and wider bolt stance
- Squared body 3D net forged 2014 aluminum for Road or Mountain use
- Contoured clamp, 4-bolt pinch prevents crushing lightweight bars
- Bias-cut steerer clamp prevents damage to lightweight steerers. 132g
|
$109.95 |
Spank 2 Timer Stem
- Zirconium infused 7000 series aluminum, CNC machined internally to remove all excess based on FEA optimization
- CNC machined logo on the faceplate. Stem is flippable for +/
- rises. 205g
- Gold foil finish is called the Royala Timer (same as 2 timer except finish)
|
$85.95 |
Spank Not 1.5 Timer Stem
- Forged/machined 6061 aluminum, FEA optimized for strength
- Stem is flippable for +/
- rises. 205g
|
$55.95 |
Straitline Vertical Wedge Mountain Stem
- Internal, vertical wedge clamp system maintains 360 degree equal contact around steerer tube (no external pinch bolts)
- Handlebar stress points minimized by motocross inspired clamping system
- Simple, lightweight and knee friendly design 260/295g (50/65mm)
- Bolts directly to 888 upper crown with correct steer tube length
- 260/295g (50/65mm)
|
$180.00 |
Straitline Pinch Clamp Mountain Stem
- Precision CNC machined and color anodized with laser-etched graphics
- Handlebar stress points minimized by motocross inspired clamping system
- 164/185g (35/50mm)
|
$125.00 |
Sunline V-One DH/FR Stem
- Weight relieved CNC machined Downhill and Freeride stem
- Four bolt faceplate with stainless hardware
|
$72.95 |
Syncros FL Stem
- FL stands for f***ing light
- 4D-Net forged bi-ovalized aluminum for XC/Marathon riding
- 4-bolt faceplate engineered to minimize stresses on handlebars. 130g
|
$99.95 |
Syncros AM Stem
- All Mountain stem, great for use on long travel trail bikes
- 3D-Net forged 6061 aluminum with high strength black-chrome bolts
- Available in standard 1-1/8" or OnePointFive steerer clamp. 175g
|
$59.95 |
Syntace F99 & F119 Stems
- F99 is a sub-100 gram, 3D forged aluminum body with 200 degrees of handlebar contact and clamp sizes to fit both Mountain and Road (F-119 is the same stem with a 31.8mm bar clamp)
- Not recommended for bars over 610mm/24� wide (excessive leverage)
- 31.8mm bar clamp also useable for Mountain bike (6 degree rise)
- Shave an additional 8 grams with titanium bolts (Wheels ti bolts in Fasteners do not fit the stem clamp). 95-112g (F99) / 117-142g (F119)
|
$107.00 |
Syntace Superforce Stem
- Lightweight Freeride/DH stem with 200 degree bar capture for less flex
- 3-D forged alloy body with matching cold-forged dual-faceplate. 140-149g
|
$70.95 |
Torelli Bormio Road Stem
- Produced using tri-dimensional forging process
- Clamp bolts are 28mm apart to give a firm rigid bar/stem assembly
- Graphics allow for flip-flop use
- 150g @ 120mm
|
$41.95 |
Truvativ XR 3D Road/Mtn Stem
- 3D forged 6061-T6 aluminum stem flip-flops for Road or Mountain use
- Blast black with 4-bolt faceplate and 1-bolt steerer clamp
- Flip-flop graphics and a 38mm steerer clamp stack height: 269g @ 90mm
|
$17.00 |
Truvativ Team 3D Road/Mtn Stem
- 3D forged 7050-TV aluminum stem flip-flops for Road or Mountain use
- Mirror black with 4-bolt faceplate and 1-bolt steerer clamp
- Flip-flop graphics and a 38mm steerer clamp stack height: 135g @ 90mm
|
$30.00 |
Woodman Wow-4 Stem
- Lightweight forged, machined and welded 6061 aluminum with stainless screws
- Laser etched logos facing 2 directions making stem flip-floppable. 200g
|
$28.95 |
|
Featured products
-
Delta Airzound Bike Horn
- 115 decibel horn with volume control switch
- Mounts to most handlebars. No batteries needed
- Air reservoir is easily refilled with any bike pump
- Extension allows for more versatility when mounting system
-
Campagnolo BIG Corkscrew
- A true classic, and symbol of genius for an iconoclastic brand
- Patented telescopic, self-aligning system always centers the screw in the center of the cork
- Hardened steel screw with a wide and shapr profile provides maximum grip on the cork, while the two large levers enable easy extraction without disturbing the wine
- Includes a wooden case with vinyard-esque packing material
-
Kenda Standard Butyl Tube
- Standard .85mm wall thickness butyl tube
-
Maxxis Xenith 26" Tire
- Mountain bike specific slick tire for 26" cross training
- 60 tpi casing, 70a durometer: Durable, fast rolling compound
-
Planet Bike Freddy Fenders Hardcore Fender Set
- Superflex unbreakable all-weather polycarbonate
- Pre-installed stainless steel hardware with mud flaps
- Includes all hardware for mounting to virtually any bike
-
OURY Grips
- Thick profile and raised square blocks with a sticky feel, 98g
|